Michigan-based Ford Motor Company is a big fan of 3D printing, and even piloted Stratasys’ Infinite Build 3D printer. In order to meet customer demand for the new models of its Lincoln Navigator and Ford Expedition SUVs, the company is increasing production of the vehicles by 25%, and using advanced manufacturing technologies including 3D printing to do it.
Ford is increasing the total investment in its Kentucky Truck Plant to $925 million, which will in turn ramp up the manufacturing line speed for the SUVs, which are two of the highest-priced vehicles that Ford sells.
The company’s automotive profit margins shrunk to 3.7% in the fourth quarter of 2017, down from 5.7% last year, so the company is also working to soothe investors and continue competing with rivals General Motors and Fiat Chrysler Automobiles.
The luxury Lincoln Navigators and Ford Expeditions are barely spending a week on the lot before they’re sold, and assembly line workers at the Kentucky Truck Plant are working overtime and weekend shifts to get the vehicles to customers as quickly as possible. But, the company’s additional investment and advanced manufacturing upgrades are helping to improve operational awareness.
“We can sell every single vehicle we can produce here. These are high-margin vehicles, so that is very meaningful,” Hinrichs said during a tour of the company’s Kentucky Truck Plant in Louisville.
A data analytics hub features seven big-screen TVs that provide plant officials with minute-by-minute updates on the production line; these updates also help workers be proactive and efficient when it comes to pending parts shortages, so they can visit the plant’s huge spare parts “vending machine” to quickly find the part they need and keep inventory where it’s supposed to be.
The Kentucky Truck Plant also installed a new 3D printer, so workers can inexpensively print individual parts for tools that help keep the plant’s efficiency up. While manufacturing a prototype part with traditional methods can cost over $250,000 just in tooling, and take 8 to 16 weeks, it only costs up to a few thousand dollars, and just hours or days, to 3D print the part.
Collectors of rare classic cars who can’t get their hands on spare parts may be forced to take the car out of action. That’s why Porsche turned to 3D printing to produce very rare parts that are only required in small quantities.
The division’s range includes roughly 52,000 parts; if the stock for one goes down, the company reproduces it with original tools, though new tools may be required for larger quantities. Unfortunately, using new tools to make small production batches of limited supply parts would be inefficient. Porsche Classic evaluated different manufacturing processes, and realized that 3D printing is a good economic alternative for small batch production of unavailable parts, like the clutch release lever on the rare Porsche 959.
This component is made from grey cast iron, and is typically in low demand, as less than 300 of the super sports cars were produced. Porsche used SLM 3D printing to make the release lever, which passed a pressure test with a load of nearly three metric tons, a tomographic examination for internal faults, and several driving tests.
3D printing technology has also been used on a number of occasions to make components and parts for race cars, and 3D printing company Immensa Technology Labs, in Dubai, hit a major milestone by being the first company in the country to provide 3D printed parts for a race car – a compact Toyota GT86.
“In alignment with the ‘Dubai 3D Printing Strategy’ launched by HH Sheikh Mohammed bin Rashid Al Maktoum, Vice President and Prime Minister of the UAE and Ruler of Dubai, we are proud to be the first 3D printing company in the UAE to apply this new technology to the local automotive industry,” said Fahmi Al-Shawwa, CEO of Immensa.
“We are confident that additive manufacturing can enhance traditional manufacturing processes, reduce costs, redefine productivity and fuel innovation across all sectors, and we are delighted to have proven this in partnership with Hussain.”
Hussain, who won the TRD 86 race in the Toyota GT86 with 3D printed parts, is also the CEO of Creek Capital and the managing director of Green Coast Enterprises.
“My racing team is committed to adopting the latest technologies and working with disruptive companies like Immensa to drive innovation. We are pleased to have set a new benchmark by using 3D printed parts in a racing car for the first time here in the region as far as I am aware,” said Hussain.
“This technology provided us with a great turnaround time for parts that we were not able to source locally and others that were produced to a much higher quality than the original parts.”
DowDuPont is one of the largest chemicals companies in the world. The firm entered the 3D printing market cautiously and later than most through a partnership with Taulman. Making far...
We’re getting the business out of the way first, then moving on to awards and rewards in this edition of 3D Printing News Briefs. CECIMO has expressed its approval of...
Automatic Potato Chips Making Machine High Quality Supplier
3D printing and additive manufacturing have become a matter of national importance in Germany, and to the automotive industry overall. Several organizations—along with the ongoing support of the Fraunhofer Institute...
Last January, 11 companies – now at a total of 16 – began working together on two aligned Joint Innovation Projects (JIPs). Their objective – collaborate in developing a guideline...
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
Potato Crisps Production Line, Frozen Production Line - Tune Machinery,https://www.tunemachinery.com/